This disk image uses Materhorn LRP to firewall and masquarade a home network
behind a single dynamic IP address. You should have an ethernet connection
to the internet, typically via a cable-modem or xDSL connection.
- This disk image is very easy to use. You simply need to uncomment
the appropriate network driver in /etc/modules, backup modules.lrp, and
reboot. See the step-by-step
instructions for detailed directions.
- You will need to configure each workstation behind the LRP box. The
LRP box should be the default gateway, and you should use the
primary/secondary DNS servers provided by your ISP. See the
instructions for details.
- There are no known issues at this time.
|
