This disk image uses Eiger LRP to firewall and masquarade a home or small
behind a single dynamic IP address. You should have an ethernet connection
to the internet, typically via a cable-modem or xDSL connection.
- This disk image is very easy to use. See the step-by-step
instructions for detailed directions.
- You will need to configure each workstation behind the LRP box. The
LRP box should be the default gateway, and you should use the
primary/secondary DNS servers provided by your ISP. See the
instructions for details.
- This disk image supports standard DHCP configuration of your external
interface. If you have to run PPPoE, you will not be able to use this
disk image :-(
- PPPoE disk image?
- Update with latest dhclient.lrp